Shelly Creates It Blog

Supplies Needed:   Zig Markers: http://shrsl.com/2mvabWatercolor Paper: http://shrsl.com/2mvajWatercolor Ink: http://shrsl.com/2mvak  Tape your watercolor paper down with washi tape, painters tape or masking tape.  This will prevent it from bubbling and curling with the water. Put a coat of water on the base, then begin adding ink with your brush.  Use a rag or paper towel to soak up extra ink, or use your brush to spread around. Let air dry or use heat gun / blow dryer to speed up the process. Using Zig markers, letter your quote. Make your turkey. Add final touches using gel pens or other mediums.    Find more...

Here's how I made my 6 platen line table for screenprinting! The supplies and materials can be found here:  The table plans can be found here: Table inspiration by OneTrickPony Get the plans from the links above.  You must have an account to t-shirt forum to access.  Don't worry...it's free! Gather and prep supplies and materials. I bought my materials in the U.S. for les than $150.   Assemble materials. & place platens on table.  Check registration.  Test print 😁 If you need more info, check out my PDF below, the video listed at the end of this post, or my skill share...

Hey, ya'll! I'm going to show you how to apply a vinyl decal to 40oz Rtic tumbler. First, you want to remove any original packing. Here I'm using an Exacto knife to remove the label. I set the label aside and re-tape once I'm ready to repackage and deliver the tumbler.Next, I remove any sticky glue or residue. I sprayed WD-40 onto a napkin and rubbed the surface of the tumbler. Then I followed with some rubbingalcohol to ensure there is no WD-40 residue before placing the decal. I placed a hand towel under the tumbler to stabilize the cup before...